Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications
Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications
Presented at the XXV International Materials Research Congress - Cancun 2016
Salinas-Rodriguez, A.; Almeraya Calderon, F.; Zambrano-Robledo, P.
Springer International Publishing AG
06/2018
143
Mole
Inglês
9783319880662
15 a 20 dias
454
1.1. Microstructural characterization of inconel 718 for future ultrasonic fatigue testing
1.2. Geometry tool influence on the microstructure of MMC Al-SiC friction stir welds
1.3. Development and characterization of a fiber metal laminates based on vinyl ester resin modified with polyurethane and reinforced with fiberglass
1.4. Synthesis and characterization of alpha alumina platelets and acicular mullite in MgO-Al2O3-SiO2 system
1.5. Influence of forging strain and heat treatment on the grain size control for nickel base superalloy C263
1.6. Study of the decomposition of martensite through DSC and the effect on nanomechanical properties in FV535 high Cr martensitic steel
1.7. Design of a device for polymerizing composites with infrared emission
2. CORROSION IN AEROSPACE MATERIALS
2.1. Pre-corrosion attack effect under ultrasonic fatigue resistant in titanium alloy Ti-6Al-4V
2.2. Effects of heat treatments in corrosion behavior of HVOF sprayed Ni-based alloy coatings
2.3. Study of susceptibility to stress corrosion cracking of inconel 600
2.4. Corrosion behavior of a austempered ductile iron used in the aeronautical industry, evaluated on acid solutions
2.4. Corrosion resistance of aeronautical YSZ-8 thin films
2.5. Wind tunnel to stress corrosion cracking test
2.6. Passivation of stainless steel in the aeronautics industry
3. AIRCRAFT STRUCTURES
3.1. Torsion fatigue test on the aeronautical aluminum alloys 6061-T6 and 6063-T5
3.2. Performance study of dry friction anti-vibratory mount for avionics components under shock loading
3.3. Structural analysis of sounding rocket fins
3.4. Mechanical behavior of a composite detachable aircraft wing structure
4. AEROSPACE COMPOSITES
4.1. Design and manufacturing of a low cost device to control curing cycles in composite materials
4.2. Modified vinyl ester resins as a suitable option of composite materials for application on wind turbine blades
4.3. Geometry tool influence on microstructure of MMC Al-SiC friction stir welds
4.4. Development of henequen glass fiber epoxy laminate composite to use in unmanned aerial vehicles
4.5. Mechanical properties of polypropylene composites and carbon allotropes
4.6. Development and characterization of a fiber metal laminate based on vinyl ester resin modified with polyurethane and reinforced with fiberglass
4.7. Fabrication of jute fiber-reinforced composite materials by hand lay-up and infusion techniques assisted by vacuum
5. NUMERICAL MODELLING
5.1. Grain size effect during hot ring rolling process using nickel-based superalloy by FEM
5.2. Finite element modelling of friction stir spot welding (FSSW) of Ti-6AL-4V
5.3. Effect of flow pattern on microstructure of disk forging superalloy
5.4. Mathematical simulation of concomitant nitride layers growth in 2-D cylindrical coordinate system
1.1. Microstructural characterization of inconel 718 for future ultrasonic fatigue testing
1.2. Geometry tool influence on the microstructure of MMC Al-SiC friction stir welds
1.3. Development and characterization of a fiber metal laminates based on vinyl ester resin modified with polyurethane and reinforced with fiberglass
1.4. Synthesis and characterization of alpha alumina platelets and acicular mullite in MgO-Al2O3-SiO2 system
1.5. Influence of forging strain and heat treatment on the grain size control for nickel base superalloy C263
1.6. Study of the decomposition of martensite through DSC and the effect on nanomechanical properties in FV535 high Cr martensitic steel
1.7. Design of a device for polymerizing composites with infrared emission
2. CORROSION IN AEROSPACE MATERIALS
2.1. Pre-corrosion attack effect under ultrasonic fatigue resistant in titanium alloy Ti-6Al-4V
2.2. Effects of heat treatments in corrosion behavior of HVOF sprayed Ni-based alloy coatings
2.3. Study of susceptibility to stress corrosion cracking of inconel 600
2.4. Corrosion behavior of a austempered ductile iron used in the aeronautical industry, evaluated on acid solutions
2.4. Corrosion resistance of aeronautical YSZ-8 thin films
2.5. Wind tunnel to stress corrosion cracking test
2.6. Passivation of stainless steel in the aeronautics industry
3. AIRCRAFT STRUCTURES
3.1. Torsion fatigue test on the aeronautical aluminum alloys 6061-T6 and 6063-T5
3.2. Performance study of dry friction anti-vibratory mount for avionics components under shock loading
3.3. Structural analysis of sounding rocket fins
3.4. Mechanical behavior of a composite detachable aircraft wing structure
4. AEROSPACE COMPOSITES
4.1. Design and manufacturing of a low cost device to control curing cycles in composite materials
4.2. Modified vinyl ester resins as a suitable option of composite materials for application on wind turbine blades
4.3. Geometry tool influence on microstructure of MMC Al-SiC friction stir welds
4.4. Development of henequen glass fiber epoxy laminate composite to use in unmanned aerial vehicles
4.5. Mechanical properties of polypropylene composites and carbon allotropes
4.6. Development and characterization of a fiber metal laminate based on vinyl ester resin modified with polyurethane and reinforced with fiberglass
4.7. Fabrication of jute fiber-reinforced composite materials by hand lay-up and infusion techniques assisted by vacuum
5. NUMERICAL MODELLING
5.1. Grain size effect during hot ring rolling process using nickel-based superalloy by FEM
5.2. Finite element modelling of friction stir spot welding (FSSW) of Ti-6AL-4V
5.3. Effect of flow pattern on microstructure of disk forging superalloy
5.4. Mathematical simulation of concomitant nitride layers growth in 2-D cylindrical coordinate system